lburgessjr, Author at Fix My Bounce House

Replacing A Cut In Moon Bounce Floor

This bounce house obstacle was cut by a sharp object. For a cut this small it can be patched.

Custom USA Made Obstacle Course Entrance Covers

The covers over the entrances of inflatable obstacle courses are there for a reason. They are there to protect the vinyl of the inflatable itself from wear and tear.

Bounce House Beyond Repair? Maybe Not

The entrance to this sport arena was so cracked and worn that the vinyl itself was leaking a lot of air. It was previously patched in an attempt to salvage it, but it was in such poor condition we completely replaced the front part of the wall from the top of the green to the bottom of the black.

Loose Seam On A Combo Popup Inflatable

The seam on this popup inside a jump slide combo came loose because of age. We we stitched it close again from the inside so that you can’t even tell there was a problem to begin with. Learn more about our repair services here.

Giant Slide Won’t Completely Inflate

If your bounce house, giant slide, or obstacle course won’t inflate completely and you can’t find the root of the problem, you can bring your moonwalk into our facility and we will inspect it for you.

Broken Entrance Step To Jump House

This entrance step was originally flat. When it started to wear down and tear, someone pinched the two panels and hand stitched them together in an effort to repair it.

Dangerous Damage In Bounce House

With issues like this that can be harmful, we always ensure our repairs are secure and the children using the moonwalk will be safe.

22′ Giant Slide Tear Repair

The tear you see here was large enough to prevent the entire 22′ inflatable slide from completely inflating. This wasn’t a simple restitch repair, because you can see in the photo that the vinyl itself tore and not just the thread.

Rip In Floor Of Inflatable Waterslide

Sand and grit can commonly be found left behind after renting out waterslides. The sand acts just like sandpaper and will wear down the stitches of an inflatable if it isn’t removed regularly. As you can see here, that’s exactly what happened.

Water Slide Corner Tear Rebuild Job

This corner on a giant waterslide tore because of people continuously walking past it. The stress and age of the vinyl forced it to form a hole.